Pressure
Product Description
Ogauge is a pathbreaking device, which combines several functions in instrumentation in one single device. It is an IIoT pressure gauge, switch, a transmitter and also a datalogger. With its integrated pressure measurement cell, a full coloured OLED display and 4 switching outputs, the Ogauge offers the user all the advantages of a modern electronic pressure switch, gauge and a transmitter. 4 switching points and switch-back points can be adjusted very simply and independently of one another using the onboard capacitive touch keypad. Programming is also possible through a mobile app. These can also be remotely set by an authorised person from a cloud based dashboard.
Ogauges are quite accurate for most applications. Some applications for plain pressure gauges are as test gauges, for leakage testing, or monitoring pump discharge pressure. With level mode they can be used to measure volume of liquid in a tank, or it’s mass, or capacity. With Force mode, it can be used for measuring force generated by hydraulic cylinders to be applied on the platen.
- Hydraulic presses
- Lubricating Pressure in rotating machines
- Liquid level in open tanks
- As test gauges
- Monitoring pump discharge pressure
Features
- IIoT capability
- Analogue output signal configurable
- Protection Class: IP 66
- Integrated pressure sensor with stainless steel membrane (special materials available)
- Can be paired to a mobile via app to check live pressures
- Accuracy 0.25% standard (finer accuracies are available)
- Can be set to display values in any unit of measurement e.g.: kN, kg, psi, ...
- Full colour OLED informative display
- Same Ogauge can be used as a pressure gauge or a force gauge or a level gauge
- Simple operation via key programming, still simpler via mobile app
- Some parameters can be configured through a dashboard
- 4 limit relays, switching points and switch back points can be adjusted independently, a time delay can also be programmed
- And many useful additional functions...
- IIoT capability
- Analogue output signal configurable
- Protection Class: IP 66
- Integrated pressure sensor with stainless steel membrane (special materials available)
- Can be paired to a mobile via app to check live pressures
- Accuracy 0.25% standard (finer accuracies are available)
- Can be set to display values in any unit of measurement e.g.: kN, kg, psi, ...
- Full colour OLED informative display
- Same Ogauge can be used as a pressure gauge or a force gauge or a level gauge
- Simple operation via key programming, still simpler via mobile app
- Some parameters can be configured through a dashboard
- 4 limit relays, switching points and switch back points can be adjusted independently, a time delay can also be programmed
- And many useful additional functions...
Technical Data
- Measuring ranges : 10 mbar to 600 bar
- Overload pressures : 1.5 times FSR
- Tightening torque : 20 Nm
- Mechanical connection : Threaded port 1/2" BSPM (other options available)
- Parts in contact with medium : Stainless steel (other options available.)
- Supply voltage : 18 .. 32 V DC
- Current consumption : approx. 200 mA
- Residual ripple of supply voltage : ≤ 10 %
- Electrical connection : 19-pole, circular MIL connector
(Note : Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided)
- Accuracy : ≤ ± 0.25 % FS max.
- Repeatability : ≤ ± 0.1 % FS max.
- Temperature drift : ≤ ± 0.03 % FS / °C max. zero point & range
- Analogue output : 4 .. 20 mA ohmic resistance ≤ 400 Ohms 0 .. 10 V ohmic resistance ≥ 2 kOhms
- Type : 4 hermetically sealed SPDT relays with change-over contacts (independent potential free contacts)
- Switching voltage and current : 5 A, 250 VAC / 5 A, 30 VDC
- Switching capacity : max. 1250 W / 1250 VA (for inductive load, use varistors)
- Switching cycles : 1 million at minimum load
- 0.1 million at maximum load
- Reaction time : < 20 ms
- Display : Full colour OLED display
- Operating temperature range : -25 to +60 °C
- Housing material : Stainless Steel case
- Weight : ~ 800 g (noted for popular pressure gauge device type, varies with models)
- Measuring ranges : 10 mbar to 600 bar
- Overload pressures : 1.5 times FSR
- Tightening torque : 20 Nm
- Mechanical connection : Threaded port 1/2" BSPM (other options available)
- Parts in contact with medium : Stainless steel (other options available.)
- Supply voltage : 18 .. 32 V DC
- Current consumption : approx. 200 mA
- Residual ripple of supply voltage : ≤ 10 %
- Electrical connection : 19-pole, circular MIL connector
(Note : Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided)
- Accuracy : ≤ ± 0.25 % FS max.
- Repeatability : ≤ ± 0.1 % FS max.
- Temperature drift : ≤ ± 0.03 % FS / °C max. zero point & range
- Analogue output : 4 .. 20 mA ohmic resistance ≤ 400 Ohms 0 .. 10 V ohmic resistance ≥ 2 kOhms
- Type : 4 hermetically sealed SPDT relays with change-over contacts (independent potential free contacts)
- Switching voltage and current : 5 A, 250 VAC / 5 A, 30 VDC
- Switching capacity : max. 1250 W / 1250 VA (for inductive load, use varistors)
- Switching cycles : 1 million at minimum load
- 0.1 million at maximum load
- Reaction time : < 20 ms
- Display : Full colour OLED display
- Operating temperature range : -25 to +60 °C
- Housing material : Stainless Steel case
- Weight : ~ 800 g (noted for popular pressure gauge device type, varies with models)
